It should not hurt the blades….This lumber is usually treated with a copper solution under high pressure (to infiltrate the wood and to slow the growth of fungi). You should wear good breathing protection as the copper can be harmful and is an irritant. Some of this wood is also subjected to high ...
Pressure-treated lumber is wood that is engineered for use on projects that are exposed to the elements. Pressure-treated wood typically starts off with one of the SPF varieties (Spruce, Pine or Fir) or other similar Softwoods, and a sealant formula is pressure-applied to the wood, so that the sealant soaks in to the core of the wood.
You can saw, drill and plane treated timber. After it has been assembled and coated with paint or a sealant, treated timber can be used indoors, but it is not recommended or necessary. Use natural pine or other timber for indoor applications.
An obvious advantage of untreated lumber is its price; it's much cheaper than treated lumber. Since CCA-treated lumber was taken off the market, new treatment techniques use high levels of copper, which is more expensive.
There should be no issue running pressure-treated boards through a planer, however, if you do a little housekeeping afterward. Give the planer a good blasting off with an air hose after you finish for the day to reduce the amount of PT sawdust left in the machine.
Every piece meets the highest grading standards for strength and appearance. This lumber is pressure treated in order to protect it from termites, fungal decay, and rot. Ideal for a variety of applications, including decks, playsets, landscaping, stair support, walkways and other outdoor projects ...
Pressure-treated wood has been around for nearly 70 years, yet most of us still know very little about this popular outdoor building material. To start, pressure-treated wood is softwood lumber ...
can you handplane pressure treated timber How to Straighten Warped Wood in 4 Easy (and Cheap) Steps Jan 9, 2014 How to Straighten Warped Wood and Eat Humble Pie I'm sitting here looking at a serviceable wooden-bodied jack plane already in my possession, and that's the tool I should use to flatten my rough-sawn boards.
After a deep power washing, the wood fibers will raise up as they expand with water.After drying, these wood fibers can often remain raised and may cause splinters. For this reason, you should plan on sanding your wood deck after power washing and before recoating it by staining and sealing.
Pressure treated wood is the term applied to tree products permeated with chemicals. The wood is placed in a container, and under extreme pressure, chemicals are forced into the porosity of the wood. The chemicals protect the wood from termites, other invasive insects, moisture, and fungal rot and decay.
Pressure treated wood that has a retention level that is higher than 0.25 should not be used in places where you will come into direct contact with your bare skin. For example: treated wood with a retention level of 0.40 is great for fence posts, but not for a picnic table.
? Pressure-treated wood should not be burned under any circumstances. The fumes can be toxic and the ash is very toxic. ? Do not use pressure-treated wood for making cutting boards, or for any food preparation surface.
Probably no problem if you just wipe it when you're done. I'd be more worried about it being wet than chemically reactive with the plane. It's also supposedly not good for you - especially if it's not new wood, at least the wood treated with arsenic isn't.